Graham Packaging Company is looking for a Machine Operator Level I, based in Mason, Ohio. This opening is for NIGHT SHIFT, which operates during the hours of 6:48pm - 7am on a rotating  2/2/3 cadence schedule.   Pay: $19.85/hr Additional $1.00 night shift differential. Once trained, wage increases to Qualified rate.   Weekly Pay and Benefits Effective Day One!   The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include but not limited to: - Understands, follows, and enforces all established safety, health, quality GMP and Company policies, procedures, and recognized practices. - Understands, follows, and enforces all established policies, procedures, and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned. - Operate a group of auxiliary equipment producing a container in a safe and high-quality method. Such as Labelers, Palletizers, Strech Wrappers, Strappers, Blenders, Vision Systems and more as needed. - Participate in continuous quality improvement projects and other related activities as assigned. - Assists on color changes on the line. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE resin (if applicable), material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist Operator II, Master Techs. and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work to in-line equipment. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines objectives. - Verify material usage per Bill of materials (BOM) - Perform minor troubleshooting on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, within customer specifications where applicable. - Properly identify regrind produced. - Assist in the training of new Operators I - Limited travel may be required.    

Graham Packaging Company is looking for a Machine Operator I - based in Mason, Ohio. This opening is for DAY SHIFT, which operates during the hours of 6:48am - 7pm with a 2/2/3 rotating 12 hour shift schedule.    Pay: $19.85/hr (Once trained, wage increases to Qaulified rate)      Weekly Pay and Benefits Effective Day One!   The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include but not limited to: - Understands, follows, and enforces all established safety, health, quality GMP and Company policies, procedures, and recognized practices. - Understands, follows, and enforces all established policies, procedures, and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned. - Operate a group of auxiliary equipment producing a container in a safe and high-quality method. Such as Labelers, Palletizers, Strech Wrappers, Strappers, Blenders, Vision Systems and more as needed. - Participate in continuous quality improvement projects and other related activities as assigned. - Assists on color changes on the line. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE resin (if applicable), material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist Operator II, Master Techs. and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work to in-line equipment. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines objectives. - Verify material usage per Bill of materials (BOM) - Perform minor troubleshooting on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, within customer specifications where applicable. - Properly identify regrind produced. - Assist in the training of new Operators I - Limited travel may be required.    

Graham Packaging Company is looking for One (1) Machine Operator level II - based in West Chester, OH. This opening is for Nights 6:50pm to 7:00am. Working 15 nights a month on a 2-2-3 rotational schedule.    Pay: $23.37/hr Additional $1.00 night shift differential.    Weekly Pay and Benefits Effective Day One!   The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned - Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. - Participate in continuous quality improvement projects and other related activities as assigned. - Perform and/or assists in mold, insert and color changes on the line. - Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist other Operators and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines’ objectives. - Verify material usage per standards - Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. - Properly identify regrind and chunk produced. - Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. - Assist in the training of new Operators. - Limited travel may be required

Maintenance Managers are responsible for the overall plant maintenance and coordination of activities with other departments in a manner which results in the production of quality product at a cost and schedule consistent with company policies, customer service and plant objectives.

Graham Packaging Company is looking for a Maintenance Technician based in Evansville, Indiana. This opening is for NIGHT SHIFT, which operates during the hours of 7p-7a.  Maintenance Technicians are responsible for installation and repair of equipment in the plant. The Maintenance Technician will perform preventative and reactive maintenance on all production equipment and building. The primary duties of a Maintenance Technician include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Focus on producing quality product by monitoring quality levels and adjust the manufacturing processes to ensure product integrity. - Maintain controls for assuring successful plant performance to budgeted goals. - Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment. - Diagnose problems, replace or repair parts, test and make adjustments. - Provide emergency/unscheduled repairs of production equipment during operation and perform scheduled maintenance repairs of production equipment during machine service. - Perform regular preventive maintenance on machines, equipment and plant facilities. - Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. - Read and interpret equipment manuals and work orders to perform required maintenance and service. - Perform simple machinist skills. - Use a variety of hand and power tools, electric meters and material handling equipment in performing duties. - Detect faulty operations, defective material and report those and any unusual situations to proper supervision. - Assist and train production employees in proper operation and maintenance of machinery - Limited travel may be required

Graham Packaging Company is looking for a Maintenance Technician based in Evansville, Indiana. This opening is for NIGHT SHIFT, which operates during the hours of 7pm-7am.   Maintenance Technicians are responsible for installation and repair of equipment in the plant. The Maintenance Technician will perform preventative and reactive maintenance on all production equipment and building. The primary duties of a Maintenance Technician include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Focus on producing quality product by monitoring quality levels and adjust the manufacturing processes to ensure product integrity. - Maintain controls for assuring successful plant performance to budgeted goals. - Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment. - Diagnose problems, replace or repair parts, test and make adjustments. - Provide emergency/unscheduled repairs of production equipment during operation and perform scheduled maintenance repairs of production equipment during machine service. - Perform regular preventive maintenance on machines, equipment and plant facilities. - Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines. - Read and interpret equipment manuals and work orders to perform required maintenance and service. - Perform simple machinist skills. - Use a variety of hand and power tools, electric meters and material handling equipment in performing duties. - Detect faulty operations, defective material and report those and any unusual situations to proper supervision. - Assist and train production employees in proper operation and maintenance of machinery - Limited travel may be required

Graham Packaging Company is looking for a Machine Operator based in Minster, OK. This position is a night shift opportunity working from approximately 7:00 pm - 7:00 am. The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned - Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. - Participate in continuous quality improvement projects and other related activities as assigned. - Perform and/or assists in mold, insert and color changes on the line. - Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist other Operators and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines’ objectives. - Verify material usage per standards - Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. - Properly identify regrind and chunk produced. - Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. - Assist in the training of new Operators. - Limited travel may be required

Graham Packaging Company is looking for a Forklift Operator based in York, PA. This is a Night Shift position operating from 7pm-7am on a 2/2/3 schedule (working every other weekend). - Pay starting at $21.47/hour. - Additional $3.00 shift differential for night shifts. - Weekly pay and benefits (medical, dental, vision, and 401k with match) effective on day one!   Forklift Operators perform a combination of product handling and lift truck operating duties to stack, transport, and store work-in-process and finished goods. Supplies production lines with efficient flow of materials – knockdowns and dividers - and moves finished goods to warehouse. Complete line driver reports accurately and legible showing locations and quantities of raw materials used as well as quantities and locations where finished goods were stored. Assist production line employees by relieving them in breaks and lunchtime periods. The primary duties of a Forklift Operator include: - Follow all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Perform a safety lift truck inspection and battery check and report any equipment malfunctioning or damage to the Warehouse Manager or Shift Supervisor. Change lift truck batteries and add water when necessary; keep record of time batteries are changed. Fill out lift truck status report. - Participate in continuous quality improvement projects and other related activities as assigned. - Review daily production schedule with Shift Supervisor, brings materials to the production lines when needed to execute schedule and notify supervisor of any materials running low. Removes finished goods from production lines, back to assigned warehouse locations. - Provide accurate information of unloaded materials as well as materials used or produced to warehouse personnel. - Remove, store, and unitize production scrap bales and informs warehouse personnel when there is enough for a full load. Removes excess corrugated from mezzanine and empties baler as required. Takes full bales of cardboard scrap from baler to assigned location in the warehouse. - Maintain accurate records of materials being used and produced, and reports them in appropriate paperwork, back to warehouse personnel. - Remove finished goods and other materials in hold to assigned location. Stores finished goods stacked neatly and in proper height. Verifies that all finished goods removed from the production area must have a product code tag. - Participate in physical inventory taking. - Keep each production line supplied with the proper knock down cases, dividers, pallets and when each pallet is full take that pallet to the warehouse for loading on the trailer; and takes unused cases and dividers back to the warehouse to the proper location. - On limited production, may assist in stock-handler duties or load trailers as needed. - Bring up hot glue cases to the mezzanine, brings color concentrate to the lines, replaces cold glue tote, removes excess cases from production floor, brings slip sheets to production floor, loads storage racks with gaylords, set up rework, set up units of product on hold for Q.C., relieves stock handlers, loads and unloads corrugated trailers, identifies good corrugated from the bad and isolates it. - Follow established forklift procedures and complete required safety and maintenance checklists - Follow established procedures for damaged finished goods and raw materials and report them on line driver report. - Communicate with supervisor regarding shift totals and machine totals reports and with other lift truck operators regarding any changes or problems that arise, including damaged materials, damaged skids, or low inventories. - Complete written documentation as required. - Assist in relieving downstream teammates for breaks and lunches. - Use forklift to move pallets of finished product to stretch wrap machines to stretch wrap them and to staging area after wrapping, or to specify warehouse location. Completes finished goods report or worksheet. - Maintain supplies of corrugated and other packaging supplies at each machine. - Visually inspect all completed pallets of product for quality and conformity to the packaging instructions to ensure quality at the source. - Limited travel may be required.

Graham Packaging Company is looking for a Forklift Operator based in York, PA. This is a Day Shift position operating from 7am-7pm on a 2/2/3 schedule (working every other weekend). - Pay starting at $21.47/hour - Weekly pay and benefits (medical, dental, vision, and 401k with match) effective on day one.   Forklift Operators perform a combination of product handling and lift truck operating duties to stack, transport, and store work-in-process and finished goods. Supplies production lines with efficient flow of materials – knockdowns and dividers - and moves finished goods to warehouse. Complete line driver reports accurately and legible showing locations and quantities of raw materials used as well as quantities and locations where finished goods were stored. Assist production line employees by relieving them in breaks and lunchtime periods. The primary duties of a Forklift Operator include: - Follow all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Perform a safety lift truck inspection and battery check and report any equipment malfunctioning or damage to the Warehouse Manager or Shift Supervisor. Change lift truck batteries and add water when necessary; keep record of time batteries are changed. Fill out lift truck status report. - Participate in continuous quality improvement projects and other related activities as assigned. - Review daily production schedule with Shift Supervisor, brings materials to the production lines when needed to execute schedule and notify supervisor of any materials running low. Removes finished goods from production lines, back to assigned warehouse locations. - Provide accurate information of unloaded materials as well as materials used or produced to warehouse personnel. - Remove, store, and unitize production scrap bales and informs warehouse personnel when there is enough for a full load. Removes excess corrugated from mezzanine and empties baler as required. Takes full bales of cardboard scrap from baler to assigned location in the warehouse. - Maintain accurate records of materials being used and produced, and reports them in appropriate paperwork, back to warehouse personnel. - Remove finished goods and other materials in hold to assigned location. Stores finished goods stacked neatly and in proper height. Verifies that all finished goods removed from the production area must have a product code tag. - Participate in physical inventory taking. - Keep each production line supplied with the proper knock down cases, dividers, pallets and when each pallet is full take that pallet to the warehouse for loading on the trailer; and takes unused cases and dividers back to the warehouse to the proper location. - On limited production, may assist in stock-handler duties or load trailers as needed. - Bring up hot glue cases to the mezzanine, brings color concentrate to the lines, replaces cold glue tote, removes excess cases from production floor, brings slip sheets to production floor, loads storage racks with gaylords, set up rework, set up units of product on hold for Q.C., relieves stock handlers, loads and unloads corrugated trailers, identifies good corrugated from the bad and isolates it. - Follow established forklift procedures and complete required safety and maintenance checklists - Follow established procedures for damaged finished goods and raw materials and report them on line driver report. - Communicate with supervisor regarding shift totals and machine totals reports and with other lift truck operators regarding any changes or problems that arise, including damaged materials, damaged skids, or low inventories. - Complete written documentation as required. - Assist in relieving downstream teammates for breaks and lunches. - Use forklift to move pallets of finished product to stretch wrap machines to stretch wrap them and to staging area after wrapping, or to specify warehouse location. Completes finished goods report or worksheet. - Maintain supplies of corrugated and other packaging supplies at each machine. - Visually inspect all completed pallets of product for quality and conformity to the packaging instructions to ensure quality at the source. - Limited travel may be required.

Overview   The IT Project Manager is a pivotal role that spearheads significant transformation initiatives across various IT domains, including applications, infrastructure, security, and services, ensuring they align with the organization’s strategic objectives and adhere to established delivery frameworks, procedures, and standards. This dynamic position not only involves the development and implementation of a robust project management framework to navigate projects through critical stage gates but also encompasses the ongoing maintenance of the IT project portfolio, prioritization of initiatives, and the continual enhancement and standardization of project management tools and functional reporting. The individual in this role must possess exceptional organizational and project leadership skills, coupled with the ability to make informed decisions, and communicate effectively. They must be proficient in directing team activities, adept at addressing and mitigating project issues and risks, and committed to orchestrating the successful and comprehensive delivery of IT initiatives.

The Rockwall Texas Maintenance Manager is responsible for the overall plant maintenance and coordination of activities with other departments in a manner which results in the production of quality product at a cost and schedule consistent with company policies, customer service and plant objectives. The primary duties of a Maintenance Manager include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participates in plant staff, shift and safety meetings, and conducts regular departmental meetings and departmental training based on needs assessment. - Participates in plant operational planning meetings. - Develop new methods and procedures to optimize manufacturing efficiency and reduce operating costs. - Maintains direct contact with the Engineering department on the latest improvements to plant machinery and systems to more effectively increase manufacturing performance and reduce operating costs. - Investigates and diagnoses causes of breakdowns and develop programs and solutions to reduce/eliminate future occurrences. - Determines and controls maintenance budget to ensure efficient use of funds and reduce/eliminate repetitive purchases by identifying and eliminating root causes. - Responsible for the selection, training and development of shift personnel to attain department goals. - Meets with vendors and plant visitors. - May be responsible for special projects related to other functional areas. - 0-25% travel may be required.

Graham Packaging Company is looking for a Machine Operator based in Rockwall, TX. This opening is for day shift, which operates during the hours of 6:54 am - 7:00 pm and rotates on a 3-2-2 schedule.    Pay: $19.85/hr   Weekly Pay and Benefits Effective Day One!   The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned - Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. - Participate in continuous quality improvement projects and other related activities as assigned. - Perform and/or assists in mold, insert and color changes on the line. - Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist other Operators and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines’ objectives. - Verify material usage per standards - Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. - Properly identify regrind and chunk produced. - Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. - Assist in the training of new Operators. - Limited travel may be required

Graham Packaging Company is looking for a Forklift Operator based in Rockwall, Texas. This position is for night shift which operates from 6:54pm - 7:00am on a 3-2-2 schedule.    Pay: $21.47/hr Additional $ night shift differential.    Weekly Pay and Benefits Effective Day One!     Forklift Operators perform a combination of product handling and lift truck operating duties to stack, transport, and store work-in-process and finished goods. Supplies production lines with efficient flow of materials – knockdowns and dividers - and moves finished goods to warehouse. Complete line driver reports accurately and legible showing locations and quantities of raw materials used as well as quantities and locations where finished goods were stored. Assist production line employees by relieving them in breaks and lunchtime periods. The primary duties of a Forklift Operator include: - Follow all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Perform a safety lift truck inspection and battery check and report any equipment malfunctioning or damage to the Warehouse Manager or Shift Supervisor. Change lift truck batteries and add water when necessary; keep record of time batteries are changed. Fill out lift truck status report. - Participate in continuous quality improvement projects and other related activities as assigned. - Review daily production schedule with Shift Supervisor, brings materials to the production lines when needed to execute schedule and notify supervisor of any materials running low. Removes finished goods from production lines, back to assigned warehouse locations. - Provide accurate information of unloaded materials as well as materials used or produced to warehouse personnel. - Remove, store, and unitize production scrap bales and informs warehouse personnel when there is enough for a full load. Removes excess corrugated from mezzanine and empties baler as required. Takes full bales of cardboard scrap from baler to assigned location in the warehouse. - Maintain accurate records of materials being used and produced, and reports them in appropriate paperwork, back to warehouse personnel. - Remove finished goods and other materials in hold to assigned location. Stores finished goods stacked neatly and in proper height. Verifies that all finished goods removed from the production area must have a product code tag. - Participate in physical inventory taking. - Keep each production line supplied with the proper knock down cases, dividers, pallets and when each pallet is full take that pallet to the warehouse for loading on the trailer; and takes unused cases and dividers back to the warehouse to the proper location. - On limited production, may assist in stock-handler duties or load trailers as needed. - Bring up hot glue cases to the mezzanine, brings color concentrate to the lines, replaces cold glue tote, removes excess cases from production floor, brings slip sheets to production floor, loads storage racks with gaylords, set up rework, set up units of product on hold for Q.C., relieves stock handlers, loads and unloads corrugated trailers, identifies good corrugated from the bad and isolates it. - Follow established forklift procedures and complete required safety and maintenance checklists - Follow established procedures for damaged finished goods and raw materials and report them on line driver report. - Communicate with supervisor regarding shift totals and machine totals reports and with other lift truck operators regarding any changes or problems that arise, including damaged materials, damaged skids, or low inventories. - Complete written documentation as required. - Assist in relieving downstream teammates for breaks and lunches. - Use forklift to move pallets of finished product to stretch wrap machines to stretch wrap them and to staging area after wrapping, or to specify warehouse location. Completes finished goods report or worksheet. - Maintain supplies of corrugated and other packaging supplies at each machine. - Visually inspect all completed pallets of product for quality and conformity to the packaging instructions to ensure quality at the source. - Limited travel may be required.

Graham Packaging Company is looking for a Forklift Operator based in Fremont, Ohio. This is a Night Shift position operating from 6:48pm-7am on a 2/2/3 schedule (working every other weekend). - Weekly pay starting at $21.47 per hour. - Additional $1.00 shift differential for night shifts. - Benefits start on Day One: Medical, Dental, Vision, and 401K with match! Forklift Operators perform a combination of product handling and lift truck operating duties to stack, transport, and store work-in-process and finished goods. Supplies production lines with efficient flow of materials – knockdowns and dividers - and moves finished goods to warehouse. Complete line driver reports accurately and legible showing locations and quantities of raw materials used as well as quantities and locations where finished goods were stored. Assist production line employees by relieving them in breaks and lunchtime periods. The primary duties of a Forklift Operator include: - Follow all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Perform a safety lift truck inspection and battery check and report any equipment malfunctioning or damage to the Warehouse Manager or Shift Supervisor. Change lift truck batteries and add water when necessary; keep record of time batteries are changed. Fill out lift truck status report. - Participate in continuous quality improvement projects and other related activities as assigned. - Review daily production schedule with Shift Supervisor, brings materials to the production lines when needed to execute schedule and notify supervisor of any materials running low. Removes finished goods from production lines, back to assigned warehouse locations. - Provide accurate information of unloaded materials as well as materials used or produced to warehouse personnel. - Remove, store, and unitize production scrap bales and informs warehouse personnel when there is enough for a full load. Removes excess corrugated from mezzanine and empties baler as required. Takes full bales of cardboard scrap from baler to assigned location in the warehouse. - Maintain accurate records of materials being used and produced, and reports them in appropriate paperwork, back to warehouse personnel. - Remove finished goods and other materials in hold to assigned location. Stores finished goods stacked neatly and in proper height. Verifies that all finished goods removed from the production area must have a product code tag. - Participate in physical inventory taking. - Keep each production line supplied with the proper knock down cases, dividers, pallets and when each pallet is full take that pallet to the warehouse for loading on the trailer; and takes unused cases and dividers back to the warehouse to the proper location. - On limited production, may assist in stock-handler duties or load trailers as needed. - Bring up hot glue cases to the mezzanine, brings color concentrate to the lines, replaces cold glue tote, removes excess cases from production floor, brings slip sheets to production floor, loads storage racks with gaylords, set up rework, set up units of product on hold for Q.C., relieves stock handlers, loads and unloads corrugated trailers, identifies good corrugated from the bad and isolates it. - Follow established forklift procedures and complete required safety and maintenance checklists - Follow established procedures for damaged finished goods and raw materials and report them on line driver report. - Communicate with supervisor regarding shift totals and machine totals reports and with other lift truck operators regarding any changes or problems that arise, including damaged materials, damaged skids, or low inventories. - Complete written documentation as required. - Assist in relieving downstream teammates for breaks and lunches. - Use forklift to move pallets of finished product to stretch wrap machines to stretch wrap them and to staging area after wrapping, or to specify warehouse location. Completes finished goods report or worksheet. - Maintain supplies of corrugated and other packaging supplies at each machine. - Visually inspect all completed pallets of product for quality and conformity to the packaging instructions to ensure quality at the source. - Limited travel may be required.

Plant Human Resources Managers oversee recruitment and retention, onboarding, employee relations, compliance, training, payroll, compensation, safety, and benefits in the plant. They are responsible for the development and administration of HR policies and procedures. Maintains and updates employee records, various reports, and provides employee coaching on work related matters. This position has a strong relationship with the Plant Manager and Plant Leadership team and must be able to understand business issues and bring solutions that advance the greater interests of the business.  

Graham Packaging Company is looking for a Sidel Machine Operator II based in Muskogee, OK. This position is a day shift opportunity working A-Shift from 7:00AM-7:30PM.   The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned - Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. - Participate in continuous quality improvement projects and other related activities as assigned. - Perform and/or assists in mold, insert and color changes on the line. - Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist other Operators and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines’ objectives. - Verify material usage per standards Qualtrics Survey | Qualtrics Experience Management - Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. - Properly identify regrind and chunk produced. - Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. - Assist in the training of new Operators. - Limited travel may be required           #INDLP

    Graham Packaging Company is looking for a(n) Palletizer Operator based in Elwood IN.     The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned - Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. - Participate in continuous quality improvement projects and other related activities as assigned. - Perform and/or assists in mold, insert and color changes on the line. - Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist other Operators and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines’ objectives. - Verify material usage per standards - Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. - Properly identify regrind and chunk produced. - Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. - Assist in the training of new Operators. - Limited travel may be required

Graham Packaging Company is looking for a Machine Operator based in Elwood IN.  The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned - Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. - Participate in continuous quality improvement projects and other related activities as assigned. - Perform and/or assists in mold, insert and color changes on the line. - Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist other Operators and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines’ objectives. - Verify material usage per standards - Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. - Properly identify regrind and chunk produced. - Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. - Assist in the training of new Operators. - Limited travel may be required

Graham Packaging Company is looking for a Production Specialist based in West Hazleton, PA. This is a Day Shift position, operating from 6:30am-7pm on a 2/2/3 schedule (working every other weekend). - Pay starting at $18.17 per hour. - Benefits start on Day One: Medical, Dental, Vision, and 401K with match! Production Specialists are responsible for general housekeeping of the production area, packing, case making, inspecting, other general factory tasks in accordance with established procedures, specifications and other guidelines. The primary duties of a Production Specialist include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned. - Visually inspect finished product for defects and ensure that cases are properly sealed. - Pack bottles in accordance to the customer specification. - Clear trimmer jams and restart, shut off/on trimmer in a safe manner. - Notify supervisor or lead of potential problems with finished product and/or machinery. - De-label and grind bottles as necessary, checking for contamination before grinding. - Strapping, tying, stacking, and orienting cases and units properly in correct unit load pattern to satisfy customer request. - Use case making equipment in a safe manner. - Maintain hot/cold glue tanks by keeping full. - Perform fiber tear checks to ensure proper glue application and pattern. - Notify the appropriate coworker, forklift driver, or assignee when supplies at the machine need to be replenished. - Communicate with incoming shift or line replacement on any problems with quality, machine, and packing configurations. - Assist with rework and heldware to ensure effective completion. - Restart, start, stop, and clears all downstream equipment as required. - Assist in the training of permanent and temporary workforce in stacking, packing quality, and case machines. - Keep work area and other facilities clean, orderly and safe. - Complete written documentation as required. - May perform basic stretch wrapper functions. - Limited travel may be required

Graham Packaging Company is looking for a Blow Mold Machine Operator based in Houston, TX. This position is a night shift position working from 10:00 pm to 6:30 am. The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: - Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. - Understands, follows and enforces all established policies, procedures and recognized practices. - Participate in continuous quality improvement projects and other related activities as assigned - Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. - Participate in continuous quality improvement projects and other related activities as assigned. - Perform and/or assists in mold, insert and color changes on the line. - Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. - Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. - Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. - Make frequent on time quality checks on products being produced from established quality standards. - Assist other Operators and maintenance personnel on mechanical repairs. - Perform assigned preventative maintenance work. - Maintain work area to acceptable safety and housekeeping standards. - Complete and file all required documentation in an orderly and timely manner. - Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines’ objectives. - Verify material usage per standards - Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. - Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. - Properly identify regrind and chunk produced. - Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. - Assist in the training of new Operators. - Limited travel may be required